Precautions For The Installation Of Air Conditioner Parts Of Copper Branch Pipe

​Air conditioner parts of Copper Branch pipe occupy an important position in all air conditioning components. They bear the function of transmitting air conditioning refrigerants. If they are not installed properly, the air conditioning may leak Freon and cause the air conditioning to fail to cool. Therefore, be sure to pay attention to the following precautions when installing.

1. Prepare the required welding equipment, suitable accessories and air conditioning copper pipes.

2. Be sure to clean the accessories and Air conditioner parts of Copper Branch pipe to be welded to ensure the correct solder joints.

3. Mark the Air conditioner parts of Copper Branch pipe to be cut and cut the air conditioning copper pipes with a copper knife.

4. Clean both ends of the Air conditioner parts of Copper Branch pipe with emery cloth or gauze until they are clean. The purpose is to remove dirt and grease and prevent oxidation.

5. Use flux for Air conditioner parts of Copper Branch pipe during welding, and only a thin layer of flux for air conditioning copper pipes.

6. When heating Air conditioner parts of Copper Branch pipe and accessories, the accessories require more heat in the pipe, so the accessories and Air conditioner parts of Copper Branch pipe should be hot enough during installation.